Polypropylene Concrete Fibers 4 MM-19 MM PP Micro Fibers

 Polypropylene Concrete Fibers 4 MM-19 MM PP Micro Fibers

This product is a high-toughness monofilament bundle fiber prepared by the directional stretching process with polypropylene (PP) as the base material. After being incorporated into the matrix as a reinforcing component of concrete, it can significantly inhibit the microcracks generated in concrete (or mortar) under the effects of plastic shrinkage, temperature difference changes, etc., and enhance the integrity of the matrix through a three-dimensional network structure, achieving a dual effect:

Crack prevention and control:Prevent and delay the formation and expansion of cracks at the micro level;

Performance enhancement:Enabling hardened concrete to achieve superior crack resistance, impact strength and structural seismic performance, especially suitable for engineering protection requirements in dynamic load scenarios.

Length:  for motor: <12 mm;

              for concrete: >12 mm
Compounding amount: for resisting the common cracks on surface, 0.9 kg/ m³ fibers to cement mortar are enough.

Stirring requirement: the proportion of cement, sand and aggregate is no need to be changed.

Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2-3 minutes in order

to make the compound mix completely.

Polypropylene fiber for concrete parameter:

 Fibers for concrete cement feature:

1.Improving the ability of concrete to resist earthquake and natural disasters

2.Improving crack resistance of concrete  

3.Reduces plastic shrinkage and settlement cracking

4.Increase the wear resistance of concrete

5.Improving the capacity of concrete to protect steel

6.Increasing the concrete crack resistance, flexural strength

Application                                                   

1. Be suitable for the water–proof layer, floor, inner & outer wall of industrial and civil construction.

2. Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

3. Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.

4. Be suitable for any mortar projects and fine aggregate concrete projects.